Thursday 13 March 2014

Salesforce Cron Format

For those unfamiliar with "cron", this means being able to create a firing schedule such as: "At 8:00am every Monday through Friday" or "At 1:30am every last Friday of the month".

A "Cron-Expression" is a string comprised of 6 or 7 fields separated by white space. The 6 mandatory and 1 optional fields are as follows:


Field Name              Allowed Values           Allowed Special Characters

Seconds                         0-59                    , - * /

Minutes                         0-59                    , - * /

Hours                           0-23                    , - * /

Day-of-month                    1-31                    , - * ? / L W C

Month                       1-12 or JAN-DEC             , - * /

Day-of-Week                 1-7 or SUN-SAT              , - * ? / L C #

Year                    (Optional) empty, 1970-2099     , - * /

The '*' character is used to specify all values. For example, "*" in the minute field means "every minute".



The '?' character is allowed for the day-of-month and day-of-week fields. It is used to specify 'no specific value'. This is useful when you need to specify something in one of the two fileds, but not the other. See the examples below for clarification.

The '-' character is used to specify ranges For example "10-12" in the hour field means "the hours 10, 11 and 12".

The ',' character is used to specify additional values. For example "MON,WED,FRI" in the day-of-week field means "the days Monday, Wednesday, and Friday".

The '/' character is used to specify increments. For example "0/15" in the seconds field means "the seconds 0, 15, 30, and 45". And "5/15" in the seconds field means "the seconds 5, 20, 35, and 50". Specifying '*' before the '/' is equivalent to specifying 0 is the value to start with. Essentially, for each field in the expression, there is a set of numbers that can be turned on or off. For seconds and minutes, the numbers range from 0 to 59. For hours 0 to 23, for days of the month 0 to 31, and for months 1 to 12. The "/" character simply helps you turn on every "nth" value in the given set. Thus "7/6" in the month field only turns on month "7", it does NOT mean every 6th month, please note that subtlety.

The 'L' character is allowed for the day-of-month and day-of-week fields. This character is short-hand for "last", but it has different meaning in each of the two fields. For example, the value "L" in the day-of-month field means "the last day of the month" - day 31 for January, day 28 for February on non-leap years. If used in the day-of-week field by itself, it simply means "7" or "SAT". But if used in the day-of-week field after another value, it means "the last xxx day of the month" - for example "6L" means "the last friday of the month". When using the 'L' option, it is important not to specify lists, or ranges of values, as you'll get confusing results.

The 'W' character is allowed for the day-of-month field. This character is used to specify the weekday (Monday-Friday) nearest the given day. As an example, if you were to specify "15W" as the value for the day-of-month field, the meaning is: "the nearest weekday to the 15th of the month". So if the 15th is a Saturday, the trigger will fire on Friday the 14th. If the 15th is a Sunday, the trigger will fire on Monday the 16th. If the 15th is a Tuesday, then it will fire on Tuesday the 15th. However if you specify "1W" as the value for day-of-month, and the 1st is a Saturday, the trigger will fire on Monday the 3rd, as it will not 'jump' over the boundary of a month's days. The 'W' character can only be specified when the day-of-month is a single day, not a range or list of days.

The 'L' and 'W' characters can also be combined for the day-of-month expression to yield 'LW', which translates to "last weekday of the month".

The '#' character is allowed for the day-of-week field. This character is used to specify "the nth" XXX day of the month. For example, the value of "6#3" in the day-of-week field means the third Friday of the month (day 6 = Friday and "#3" = the 3rd one in the month). Other examples: "2#1" = the first Monday of the month and "4#5" = the fifth Wednesday of the month. Note that if you specify "#5" and there is not 5 of the given day-of-week in the month, then no firing will occur that month.

The 'C' character is allowed for the day-of-month and day-of-week fields. This character is short-hand for "calendar". This means values are calculated against the associated calendar, if any. If no calendar is associated, then it is equivalent to having an all-inclusive calendar. A value of "5C" in the day-of-month field means "the first day included by the calendar on or after the 5th". A value of "1C" in the day-of-week field means "the first day included by the calendar on or after sunday".

The legal characters and the names of months and days of the week are not case sensitive.


Pay attention to the effects of '?' and '*' in the day-of-week and day-of-month fields!

NOTES:

--> Support for the features described for the 'C' character is not complete.
--> Support for specifying both a day-of-week and a day-of-month value is not complete (you'll need to use the '?' character in on of these fields).
--> Be careful when setting fire times between midnight and 1:00 AM - "daylight savings" can cause a skip or a repeat depending on whether the time moves back or jumps forward.

A normal scheduling expression to for a Scheduler Class that will run on every Friday of the Week at 4 PM.

Sched_WeeklyStatus m = new Sched_WeeklyStatus();
String sch = '0 0 16 ? * FRI';
String jobID = system.schedule('Send Reminder for Work Status', sch, m);


To schedule every 15 minutes, use below one

System.schedule('Scheduled Job 1', '0 0 * * * ?', new ScheduledClass());
System.schedule('Scheduled Job 2', '0 15 * * * ?', new ScheduledClass());
System.schedule('Scheduled Job 3', '0 30 * * * ?', new ScheduledClass());
System.schedule('Scheduled Job 4', '0 45 * * * ?', new ScheduledClass());

Happy Coding..!!!!